Aike Hydraulic Quick Coupling

    Home > News > Hydraulic Coupler News

    When choosing rotary quick coupling, what should we pay attention to?

    2019-03-06 15:31:02 Aike Hydraulic Quick Coupling Read

    When choosing rotary quick coupling, what should we pay attention to?

    1546590587569654.jpg

    What should we pay attention to when choosing rotary quick coupling?

    Ⅰ. When choosing the type of rotary quick coupling, you should first look at the type of equipment connected with the rotary joint. The input and output media of the equipment are different. Double-pass and single-pass rotary quick connectors are selected according to the input and output of the equipment.


    Ⅱ. The input and output of the equipment also decide the passage problem with the rotating fast joints. The passage of the rotating quick connector must be mastered accurately, otherwise the rotating joint will be congested.


    Ⅲ. If there are many places of output and input media in the equipment, then the multi-channel rotary joint is chosen, and the multi-channel rotary joint operates in different ways of medium input and output.


    Ⅳ. The connection of the equipment also confirms the type of penetration of the rotary quick coupling, such as the embedded type, the size of ribs, and the rotation direction of the rotary quick joint. Be sure to remember the rotation direction of the rotary connector, otherwise the wrong connection will not be installed.



    TAG:   rotary quick coupling
    Powered by MetInfo 5.3.19 ©2008-2019 www.MetInfo.cn